B-1.1, r. 9 - Regulation respecting the professional qualification of contractors and owner-builders

Schedule Disposition versions

2012-09-01

SCHEDULE III

(s. 10)

LICENCE SUBCLASSES IN THE SPECIALIZED CONTRACTOR’S LICENCE CLASS REFERRED TO IN SECTION 10

2.5 Contractor – excavation and earthwork

Except for the work in subclasses 2.2 and 2.4 of Schedule II, this subclass authorizes construction work relating to excavating, moving, compacting and levelling of earth or granular materials, including work relating to small works of art, and similar or related construction work.

2.7 Contractor – sitework

This subclass authorizes construction work relating to the preparation and finishing of sitework, such as alignment, levelling, fencing, demolition, paving and asphalting, laying interlocking paving stones, and similar or related construction work.

3.2 Contractor – small concrete works

This subclass authorizes construction work relating to concrete formwork for foundation walls of buildings referred to in Part 9 of the National Building Code – Canada 1995 (NRCC 38726E) as adopted by Chapter I of the Building Code (chapter B-1.1, r. 2), without regard to the exemptions in Division II of the Regulation respecting the application of the Building Act (chapter B-1.1, r. 1) and to other concrete works, concreting, reinforcement and concrete finishing, and similar or related construction work.

4.2 Contractor – non-structural masonry, marble and ceramics

This subclass authorizes construction work relating to non-structural masonry, marble, granite, ceramics, terrazzo and other similar materials, refractory products, and similar or related construction work.

5.2 Contractor – metal fabrication

This subclass authorizes construction work relating to cold-formed steel and aluminium sections used in the construction of non-bearing partitions, wrought metal, welding, and similar or related construction work.

6.2 Contractor – wood and plastic work

This subclass authorizes construction work relating to wood and plastic structures such as finishing carpentry, and similar or related construction work.

7. Contractor – insulation, waterproofing, roofing and siding

This subclass authorizes construction work relating to fireproofing, waterproofing, insulation, lagging, roofing, siding other than masonry, and similar or related construction work.

8. Contractor – doors and windows

This subclass authorizes construction work relating to doors, windows, glazed curtain walls, and similar or related construction work.

9. Contractor – interior finishing

This subclass authorizes construction work relating to interior and exterior painting, interior surfaces such as flooring, wall and ceiling and their finishing, and similar or related construction work.

11.2 Contractor – special equipment and products

This subclass authorizes construction work that is not reserved exclusively for master pipe-mechanics and electrical contractors relating to all types of equipment and special products that are not already governed by a subclass in Schedule II or this Schedule, and similar or related construction work.

12. Contractor – manufactured cabinets and counter tops

This subclass authorizes construction work relating to manufactured cabinets and counter tops, and similar or related construction work.

13.5 Contractor – prefabricated or special installations

This subclass authorizes construction work that is not reserved exclusively for master pipe-mechanics and electrical contractors relating to prefabricated or special installations such as cold rooms, pools, skating rinks, excluding their heating and cooling systems, and noise and vibration protection systems.

It also authorizes similar or related construction work.

17.2 Contractor – intercommunications, telephone and surveillance

This subclass authorizes construction work that is not reserved for electrical contractors relating to intercommunications, telephone and surveillance systems, and similar or related construction work.

O.C. 314-200, Sch. III.